En Marconi MSH‑11CP is an enhanced variant of the MSH‑11C access node, purpose-built for multiservice SDH transport in legacy telecommunications networks. It supports STM‑1 on both tributary and optical sides, along with up to 63 E1 interfaces for voice, data, and PDH aggregation. Designed for high‑density compact installations, the MSH‑11CP combines flexible tributary mapping, carrier-grade reliability, and integrated cross‑connect functionality into a compact chassis suitable for last‑mile access, metro aggregation, and enterprise leased‑line delivery.
The MSH‑11CP’s advanced configuration options include fast‑Ethernet card support for efficient mapping and grooming of Ethernet traffic over SDH (VC groups, GFP, LCAS), enabling operators to carry modern packet services reliably over legacy infrastructure. Carritech supports customers operating the Marconi MSH‑11CP by sourcing full units, spare modules, line cards, and power components through our global network. We ensure each item is quality‑tested, verified for compatibility, and delivered with transparent logistical and lifecycle support.
Enhanced STM‑1 Capacity: Dual STM‑1 transport interfaces optimize aggregation and distribution in access networks.
Full E1 Tributary Support: Configurable support for up to 63 E1 ports, suitable for voice, data, or PDH services.
Modular Fast‑Ethernet Functionality: Supports mapping Ethernet traffic into VC‑12 or VC‑4 containers, with virtual concatenation and LCAS support for flexible capacity scaling.
SDH Cross‑Connect & Protection: VC‑12 and VC‑4 level switching, with support for protection schemes like SNCP and MSP.
Service Grooming & Transport Optimization: Efficient traffic aggregation with pointer processing, grooming, and traffic protection.
Carrier‑Grade Design: High MTBF, low power usage, and resilient performance in operational environments.
Standard Network Management: Compatible with SNMP, TL1, and legacy Marconi NMS platforms for remote management and diagnostics.
Compact Footprint: Ideal for constrained sites, base stations, and small exchanges with minimal rack space.
Chassis & Form Factor:
Rack‑mountable sub‑rack (typically around 2U–3U), compact depth for shallow installations
Transmission Interfaces:
2 × STM‑1 (optical or G.703/G.704)
Optional STM‑4 mapping depending on configuration
E1 Tributaries:
Typically configurable up to 63 E1 ports depending on installed modules
Fast‑Ethernet Card Support:
Enables Ethernet mapping at wire‑speed over SDH with support for LCAS, virtual concatenation, and multiple encapsulation schemes
Cross‑Connect Capacity:
Non‑blocking grooming and switching at VC‑12 and VC‑4 levels
Fuente de alimentación:
Standard -48 V DC input, with redundant PSU options available
Refrigeración:
Fan‑based, front‑to‑back or side airflow depending on installation configuration
Environmental Ratings:
Standard operating temperature range 0°C to +45°C (extended variants may exist); humidity up to 95% non‑condensing
Management Interfaces:
Local interface for manual access, remote access via SNMP or TL1; supports legacy Marconi NMS integration
Standards Compliance:
Built to align with ITU‑T SDH standards, ETSI/ Telcordia physical and performance specifications, and SDH protection schemes support
Fast-Ethernet Card Compatibility:
Supports up to 16 ports per card, Ethernet frame sizes up to around 1600 bytes, GFP mapping with LCAS and VLAN/MPLS awareness
| Periodo de tiempo | Marca / Empresa | Papel / Notas |
|---|---|---|
| Early 2000s – 2006 | Marconi Communications / Marconi Corporation plc | Original designer and marketer of the MSH‑11CP, positioned as a high‑capacity SDH access node within its PacketSpan portfolio. |
| 2006 – Present | Ericsson (legacy support only) | After acquiring Marconi’s telecom assets, Ericsson gradually phased out sales and formal support for the MSH‑11CP, offering limited support to legacy users under service agreements. |
| Presente (mercado secundario) | Distribuidores independientes y especialistas en asistencia (por ejemplo, Carritech) | Carritech sources and supplies Marconi MSH‑11CP systems, modules, and accessories; offering testing, logistics support, and lifecycle extension services to maintain legacy SDH deployments. |
No se han encontrado archivos.
Desde el mantenimiento y la reparación por parte de expertos hasta el suministro fiable de piezas y el asesoramiento técnico, proporcionamos asistencia integral para cada etapa del ciclo de vida de su red. Tanto si desea ampliar la vida útil de los sistemas heredados como si desea integrarlos en una infraestructura moderna, nuestro equipo le garantiza soluciones rentables, eficientes y sin problemas, para que pueda centrarse en el rendimiento, no en los problemas.